Runway

Runway answers one question: how long will my money last? It adds up the accounts you choose, works out how fast they are draining, and shows the month they run out, both at your real spending and if you had kept to your budgets.

Overview#

If you are living off savings, between contracts or on a career break, the balance on its own does not tell you much. What you want to know is how many months it covers.

Runway takes the combined balance of your chosen accounts and your average monthly drain (money out minus money in). It then counts forward to the day the total reaches zero. It does this twice: once at your current spending, and once on budget. The gap between them tells you how much longer you would last by sticking to your budgets.

Runway is separate from the Forecast page. It does not change it, and it does not model interest, investment growth or inflation.

Adding the tiles#

Runway lives on the Dashboard. The tiles are off by default, as most people are not living off savings. To add them, unlock the dashboard, open Add Tiles and look under Forecasting.

TileWhat it shows
RunwayThe headline: "About 21 months", the month it runs out, a small on-budget line and your monthly drain.
Runway forecastA chart of your total. Past months are a solid line, then a dashed line to zero for each scenario. Planned one-offs are marked, and a line shows today.
Planned one-offsYour list of known future lump sums. Add, edit and delete them here.
How long will it lastThe two scenarios side by side, each with its months, monthly drain and run-out month, plus the difference between them.
Where the drain comes fromMoney out, money in and the net drain per month, and anything left out of the average.
Runway overviewAll of the above in one wide tile.

Use whichever tiles you like, together or alone. They all read the same setup, so they always show the same numbers. Several tiles on one dashboard still load with a single request.

Setting it up#

There is one setup, shared by every runway tile. While the dashboard is unlocked, click the gear on any runway tile to open it. Changing it updates all the tiles together.

SettingWhat it does
Accounts to countWhich accounts make up your total.
Months to averageHow many full months of history the average is taken from, 1 to 12. The default is the last 3 full months.
Include scheduled paymentsWhether future-dated payments are applied on their dates. On by default.
Alert thresholdHow many months earlier your run-out date must move before you are told, 1 to 6. The default is 1.

Which accounts count#

Until you choose, Runway counts:

  • Current/checking, savings, cash and money market accounts
  • Credit cards

It leaves out pensions, investments, loans and mortgages, and any account you have excluded from reports. You can tick any of them in the setup if you want them counted.

The total is each account's balance as of today, converted to your base currency at your exchange rates. A credit card balance is money you owe, so it is taken off the total. A card that is in credit adds to it.

Important: Because a card's balance is already taken off the total, paying the card off changes nothing. Do not add a card payoff as a one-off, or it will be counted twice.

How the monthly drain is worked out#

Runway looks at the last few full calendar months before the current one. The month in progress is left out, as a few days of it would look like a month with almost no money in. If you have less history than you asked for, it uses what there is. With none, the tiles say Not enough history yet.

For the accounts you chose:

  • Money out is everything that went out, divided by the number of months.
  • Money in is everything that came in, divided by the number of months.
  • Drain is money out minus money in.

A few rules decide what counts:

  • Transfers between two counted accounts are ignored. Moving money from savings to your current account is not spending.
  • Money moved to an account you do not count counts as spent. If you move money into a pension that Runway is not counting, it has left your runway.
  • Money in from other people and benefits counts as income. A housemate paying their share of the bills, or a benefit payment, is money in.
  • Scheduled rows do not count as actual spending. Only transactions that have really happened go into the average.

Leaving out one-off spending#

A big one-off, such as repaying a loan, would distort an average taken over a few months. Tick Exclude from forecast in the transaction's edit form to keep it out of the average. It still changes your account balance, so the total stays true. See Transactions and Excluding One-Time Items.

The Where the drain comes from tile lists what has been left out, for example "2 transactions, £1,500", so you can check nothing has been left out by mistake.

Bills that come round less often#

A yearly or quarterly bill is awkward in a short window. If it falls inside the window, it makes the average look too high. If it falls outside, the average misses it.

So a bill that comes round less often than your window (a yearly bill with a 3 month window, say) is spread out instead. Its payments in the window are taken out of the average, and its monthly equivalent is added in.

This only works for payments that are linked to a bill. A payment that is not linked to a bill cannot be recognised and stays in the average as it is. If you have those, a longer window evens them out.

The two scenarios#

At current spending#

This is your average monthly drain, as described above. It is what has really been happening.

On budget#

On budget starts from your actual spending, then swaps each budgeted category's spending for its budget. It answers: what if I had stuck to my budgets where I have them?

  • A budget on a parent category covers its sub-categories that have no budget of their own.
  • Spending in categories without a budget stays at what you really spent.
  • Your average money in stays the same, so it already includes things like benefits and a housemate's share.
  • Envelope rollover carry is ignored, as a single month's carry would otherwise repeat every month.
  • A budget set for a year, a quarter or a week is turned into a monthly amount, as on the Budget page.

If you spend less than a budget, on budget assumes you spend all of it. So on budget can come out shorter than current spending. It means "if you spend your full budgets", which is a cautious way to plan.

You need at least one category budget. Without one, the on-budget box says to set category budgets to see this.

The difference line says how many months longer (or fewer) you would last on budget, to the nearest half month.

Planned one-offs#

Known lump sums in the future can be added to the Planned one-offs tile. Each has:

  • A description
  • An amount, as money out or money in
  • A date

One-offs only affect the runway forecast. They never create transactions and never change your balances. Both scenarios use the same list.

Use them for things like a holiday you have booked, a tax bill, or a payout you are expecting. A one-off dated in the past is greyed out and ignored until you delete it.

Tip: Do not add a credit card payoff here. The card balance is already taken off your total.

Scheduled payments#

With Include scheduled payments on, payments already dated in the future on your counted accounts are applied on their dates.

The one exception is the next pre-booked payment of a regular bill, such as your rent. That bill is already in the average, so applying it again would count it twice. Future payments with no bill, or from a one-time bill, are applied.

Reading the result#

The headline is worded to be plain:

WordingMeaning
About 21 months, until around Jul 2028Your money runs out about then.
Less than a monthIt runs out within the next month.
More than 10 yearsIt lasts beyond the 10 year limit Runway looks ahead.
Not running outMore is coming in than going out.
Already at or below zeroYour total is zero or less today, so there is nothing to project.
Not enough history yetThere are no full months to average.

Months are rounded to the nearest whole month. The run-out date is the first day the projected total reaches zero.

Run-out alerts#

Runway can tell you when your run-out date moves earlier. You get a Nextcloud notification when the date at current spending has moved a month (or whatever you set as the Alert threshold, up to 6 months) earlier than the last time you were told.

  • The first check only records a starting point. It does not notify.
  • If the date moves later, the starting point moves with it, so a later fall from that better position is caught.
  • Time passing on its own never triggers an alert.

The check runs once a day. To switch it off, go to Settings and turn off Runway alerts under notifications.

The usual alerts for categories reaching their budget are separate. See Budget.

Reading it from the API#

The same figures are available to scripts and apps at GET /runway.

  • Dashboard - Where the runway tiles live.
  • Forecast - Projects balances forward from your history, per account.
  • Budget - The category budgets the on-budget scenario uses.
  • Bills - Regular bills are part of the average, and long-period bills are spread out.
  • Transactions - Where to tick Exclude from forecast.
  • REST API - Read the runway figures from your own scripts.

Settings#

Runway has one setup per user, opened from the gear on any runway tile while the dashboard is unlocked. The alert switch is in Settings under notifications.